The development history of cooling fans is very long. With the faster and faster modern development speed, some equipment industries that are prone to produce high heat begin to require higher and higher quality of cooling fans. Some better cooling fans may also have high air volume, Low noise and long life, how are these conditions realized and improved? Today, the Dongguan cooling fan will tell you.

   These conditions are of course realized by the R&D department and the production department of the cooling fan manufacturer. The R&D department and the production department of each cooling fan manufacturer are different. There are many factors that need to be considered, and sometimes they increase according to customer needs. The research and development of new products, so every product developed by the research and development department of the cooling fan manufacturer is very important.

      The design and research and development of the outer frame of the cooling fan need to consider and test the resistance and auxiliary force of various frame shapes to ventilation, how can the intersection of wind and wind pressure reach a perfect point, and how can the bearing friction in the fan be minimized , How can the chip be used to strengthen the performance of the auxiliary fan and ensure the safety of the fan, etc. These all need to be handled by the research and development department. When the internal structural parts and wind pressure speed of the two DC cooling fans are exactly the same, the outer frames of different shapes are used for testing. Among them, the performance of this fan with a very well-designed outer frame can be better than the other one with a general outer frame. The fan has increased by 20%, which shows how important the research and development of a product is.

      The production department is also very important. A good production department can increase the quality of the entire product by about 40%, and a good production department can increase the delivery speed and save production costs. For example, soldering, a skilled soldering worker can often avoid the defective rate of the fan to a large extent and improve the stability of the cooling fan.

      It can be seen that a good cooling fan manufacturer is indispensable to a good R&D department and production department. This will determine the future direction of the cooling fan manufacturer. After being put into use, it will also affect thousands of equipment. Good or bad can be described as extremely important.